5 DIY Teepees For Fun Kids’ Playrooms

So you want to build a DIY teepee, but you don’t have the money or time to purchase a kit. Some people do build their own, but it’s not for everyone. You need to be certain that you are comfortable working with wood, nails, and sawdust. In this article I will give you some helpful hints on building your own DIY teepee.

Wood is the most important material for a teepee. It should be treated with a protective finish, or at least sealed with weather-proofing materials. A painted teepee won’t stand up to the elements for very long. Therefore, your chosen wood type must be weather resistant or have been treated in some way to help protect against the elements.

5 DIY Teepees For Fun Kids’ Playrooms

Source: tr.pinterest.com

This leads us to the next factor, nails. Wood can snap under the weight of nails. That is why some people will put extra nails in the corner or side of the temple to keep the weight off of the sides. If you’re planning on using a frame, then it’s important to put nails at the ends to support the frame. You may not be able to get a good placement for your nails, so talk to a lumber yard and see if they will give you a free quote on placing the nails.

The next step is to determine where you plan to place your teepee. You’ll need to make sure that the ground is level, and that there is a good moisture source. Of course, if you’re going to use a framing system to support the structure, then the keeper needs to sit on top of a concrete slab. If you aren’t sure how to tie down the structure, ask someone who does it. It may take more time than you anticipate, but you don’t want to risk your teepee toppling over during the build.

If you’re going to use nails to support the walls of your temper, then you’ll want to locate the nails at the end of the posts. This is done because the angle between the nails and the posts can be lessened, making it easier to work with. The fact that the nail ends are closer to the floor can also make working with wood a little easier. You don’t want to place your nails too far down, though. Any good professional can help you get your nails placed properly.

After you’ve secured the walls, and the nails, you’ll need to start cutting your pieces of wood to fit your teepee. For the roof, you can either use plywood, or canvas, but whatever you use needs to be protected from moisture. You can also cover the entire roof with a sheet to protect the canvas. Whatever material you use, you want to make sure that it’s waterproof.

Source: roadtitans300.com

Source: handicraftgirl.com

Source: pinterest.ca

Once you have the pieces of wood and the roof, you can build the body of your temple. Of course, you want to make sure that the seams are stitched correctly, and that the seams are even and perfectly even. When you stitch the seams, make sure that you use a small, steady hand. Another important tip is to be mindful of the structure itself. This is especially true for those who are new to building a teepee. Don’t skimp on the wood. Be careful that the seams aren’t sewn by accident, and remember that you should always be working in a stable, safe area.

Elsa Larissa

Elsa Larissa

Elsa Larissa is a writer, editor, home décor and interior design enthusiast. Elsa is passionate about the environment, and enjoys writing about decoration and sustainable home architecture. An avid traveler, Elsa expands her perspectives on art and design styles from the different destinations.

Leave a Reply

Your email address will not be published. Required fields are marked *